Tools
Park Tool Master Chain Tool
Park's Master Chain Tool is designed specifically to work with the tight tolerances and narrow profiles of 10- and 11-speed chains and all high-quality derailleur chains. It's made of tool steel for excellent durability and uses an integrated link pocket to ensure precise alignment. It also… [more]
Park Tool Crown Race Setting System (1.25, 1.5-inch)
Quickly, safely and easily set your crown race on 1.5-inch steerer tubes with Park's CRS-15 Crown Race Setting System. Specifically engineered for oversized steerers, the CRS-15 comes with one setting tube and a 1.5-inch inset that ensures full contact with the crown race for precision installation. [more]
Lezyne Carbon 10
Lezyne's Carbon 10 folding tool is super light and contains the basics for road and trailside repairs. Its carbon body holds ten tools including: 2, 3, 4, 5, 6, and 8mm Allen wrenches plus a Phillips screwdriver. There is also a chain tool as well as T25 and T30 Torx bits. And, it only weighs 80… [more]
Crank Brothers Pica+ Premium Tool
Crank Brothers' Pica+ Premium Tool is so nice you might want to save it for your workshop. Where it really shines, though, is out on the trail. It's constructed from 6061-aluminum and investment-cast stainless steel for repair-after-repair durability and stunning good looks. Plus, this sweet… [more]
Park Tool Shop Cone Wrench Set
Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole… [more]
Park Tool Frame Alignment Gauge
Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to… [more]
Park Tool Rivet Peening Tool for Campagnolo 11-speed chain
After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be "peened" or "deformed" to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process. Note:… [more]
Crank Brothers Pica Premium Tool
Crank Brothers' Pica Premium Tool is so nice you might want to save it for your workshop. Where it really shines, though, is out on the trail. It's constructed from 6061-aluminum and investment-cast stainless steel for repair-after-repair durability and stunning good looks. Plus, this sweet… [more]
Hayes Bleed Kit And Fittings
- Hayes pro-bleed kit includes: (1) 4oz DOT-4 Brake fluid, Lock-On hoses, sealed fluid catch bottle, and all fittings - Radar pro-Bleed kit includes: (1) 4oz mineral oil brake fluid, Lock-On hoses, sealed fluid catch bottle, and all fittings - Separate fittings available as spares or to update… [more]
Jagwire Pad Press Plus
Jagwire's Pad Press Plus is a handy tool that makes removing and installing cartridge brake pads quick and precise. The holder and lever action makes it easy to hold the brake shoes while you push out the pad inserts and press in the replacements. And you can bolt this fine tool to a workbench with… [more]
Park Tool Backpack Harness For BX-2/EK-1
For the mechanic on the go, Park's Backpack Harness carries your Blue Box Tool Case full of tools easily and comfortably. It's complete with padded shoulder, chest and waist straps and extra accessory pouches. The BXB-2 is fully adjustable and set up is quick and easy. [more]
Park Tool P-Handled Torx Wrench Set
Park's Torx Wrench Set includes T-handled T6, T8, T10, T15, T20, T25, T30 and T40 Torx wrenches with offset handles made from durable nylon in a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for exceptional durability. Plus, this set of super tools comes with… [more]
Campagnolo Over-Torque Crankset Tool
Designed specifically to install and/or remove Campagnolo over-Torque cranksets with a 30mm spindle. [more]
Park Tool Campagnolo Power Torque Crank and Bearing Adaptor Set
The CBP-5 is used in conjunction with the CBP-3 set to remove and install Power Torque crank arms and right side crank bearings. The CBP-5 includes: • Crank and crank bearing removal adaptor to be used with the CBP-3 Bearing Puller • Power Torque bearing setter • Removal pads for use with carbon… [more]
RockShox RS1 Anchor Fitting Tool
• Use to remove air shaft and damper shaft • Reverse threaded • See RS1 Service Manual for instruction [more]
Specialized S-Works Zee Cage w/ Multi-tool
Specialized's Zee Cage integrates an EMT Cage Mount multi-tool, easily allowing riders to combine hydration and repair equipment in an amazingly clean, tidy solution. The cage is available in either a right- and left-hand bottle load, perfect for full suspension and smaller frames. [more]
Park Tool Frame and Fork Straightener
Park Tool's Frame and Fork Straightener is a versatile and productive tool. Its open hook design enables it to straighten not only frames and forks, but also cranks and handlebars and it features vinyl coating on the hook and fulcrum pad to protect painted surfaces. The FFS-2's hook offers 8 inches… [more]
Park Tool Cable Stretcher
Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for… [more]
Park Tool Thru Axle Adaptors
Park Tool's Thru Axle Adaptors make it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale Lefty wheels (each sold separately). The TS-TA also work with the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA… [more]
Park Tool P-Handled Hex Wrench Set
Park's Hex Wrench Set includes P-handled 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches with offset handles made from durable nylon in a comfortable, ergonomic design. The wrenches are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing… [more]
Park Tool Tire Seating Tool
Park's Tire Seating Tool is designed to quickly seat the bead on stubborn tires. During inflation some tire beads can slip below the rim edge and become difficult to pull out and align. The PTS-1 comes to the rescue with its non-slip jaws and vinyl-coated handles that provide plenty of leverage for… [more]
Finish Line Pro Care Bucket Kit 8.0
Want your bike to look and run like a pro's ride? Pick up Finish Line's Pro Care Bucket Kit 8.0. It comes with everything you need to keep your steed cleaned and lubed: Wet lube, Dry lube, Bike Wash cleaning solution, Finish Line's Grunge and Scrub Brushes as well as their Multi and Speed… [more]
Park Tool Crown Race Setting System (1, 1-1/8 -inch)
Quickly, safely and easily set your crown race with Park's CRS-1 Crown Race Setting System. It includes 6 different inserts (3 for 1-inch and 3 for 1-1/8-inch steerer tubes) that ensure full contact with the crown race for precision installation. [more]
Park Tool Frame and Fork End Alignment Gauge Set
Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers, as well as tracking and shifting problems. The Frame and Fork End Alignment Gauge Set quickly determines whether the frame or fork dropouts are aligned and parallel. If an error is detected, long handles and… [more]
Park Tool Home Mechanic Bearing Cup Press
Simple and economical, Park's Home Mechanic Bearing Cup Press is the perfect addition to your toolbox. With a few quick twists it easily installs all sizes of headset cups and one-piece bottom bracket cups. [more]
Park Tool Metric Wrench Set
Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool… [more]
Park Tool Spoke Tension Meter
The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. Park's Spoke Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. It's easy… [more]
Park Tool Digital Caliper
What's your seatpost size again? Park's Digital Caliper accurately measures seatposts, head tubes, bearings, spoke diameters, etc. It's a precision instrument built accurate to 0.01mm with a stainless-steel mechanisms and a rugged composite body. The tool’s ability to measure in metric, decimal… [more]
Park Tool Small Clicker Torque Wrench
Park's Small Clicker Torque Wrench is a 7.5-inch long, ratcheting, click-type torque wrench that provides accurate torque so you can always tighten your components correctly and ensure they stay tight, and prevent damage too. You simply twist the end of the handle to preset your desired torque… [more]
Park Tool Campagnolo Bearing Puller and Installation Set
Park's Campagnolo Bearing Puller and Installation Set is designed and built to install and remove the pressed bearing used on Campagnolo and Fulcrum Ultra-Torque cranks. The bearing puller’s forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system “pulls”… [more]